20 kg
Art. No: W140619
It is a liquid product developed for cleaning oxidation, welding and rust stains on stainless steel surfaces. It can also be used to remove surface contamination in industrial areas, kitchens, installations, equipment, etc. containing stainless steel surfaces.
Details
150 ml
Art. No: W140623
It is used for cleaning, maintenance, protection and polishing of all pure metals. Not suitable for anodised coated metals. Thanks to its non-toxic and special content, it does not irritate the skin and delays the formation of stains on metals. Can be used on all metals as well as fibreglass, painted surfaces and worn coatings.
Details
20 kg
Art. No: W140624
Passivation Fluid is used to prevent oxidation in stainless steels after pickling or mechanical processes such as grinding and polishing. The passive film formed on the surfaces protects the treated bright surface of the stainless steel.
Details
3 l
Art. No: W140598
Cleans hands from the most stubborn dirt, grease, oil, tar, pitch, coal grinding dust and residues. The product has a skin moisturising effect, so it is not harmful with frequent use.
Details
200 g
Art. No: W150302-200
Prevents spattered parts from sticking to the torch during welding. Protects the torch and extends its service life. Does not contain silicone. Does not emit toxic gas and smoke. Does not harm the user and the environment. Very economical.
Details
300 g
Art. No: W170123
General purpose cleaning and care paste. Removes dirt, lime and yellowing residues in one step. Provides industrial performance at many points such as kitchen, bathroom, garden furniture etc.
Details
400 ml
Art. No: W170112
IMPA. CODE: 450804
Removes oil, nicotine, insect residues and fingerprints from all surfaces. It provides deep cleaning by hanging on the surfaces it is applied with its foam form.
Details
60 l
Art. No: W140611-60
Thanks to its special formula, it provides cleaning of grease, tar and other oils in layers without much effort. It is especially effective in cleaning brake fluid, oil and grease, as well as removing contaminants such as dust etc. from automobile parts.
Details
30 lt
Art. No: W140614-30
It is a gel product used to clean welding stains, oxide marks and rust stains especially on stainless steels with low sulphur content. It can be applied in industrial areas, kitchens, installations, machinery, etc. on surfaces with stainless surface contamination. Cleaning the surfaces before application increases the effectiveness of the product even more.
Details
400 ml
Art. No: W170188
It is a dry and deep cleaning spray for hard-to-reach, sensitive parts. Especially for the delicate cleaning of electronic devices. The product has a dual function; when applied upside down, it acts as a cooling spray.
Details
5 l
Art. No: W170120-5
It is a water-based cleaner used to remove residues such as dirt, oil and ink from all kinds of surfaces. It can be biologically separated into its components in nature. The concentrated product can be diluted with water according to the type of surface and dirt to be cleaned and specialised for the purpose of use.
Details
30 l
Art. No: W140600
It is a ready-to-use cleaning, maintenance and polishing material for all metal surfaces including aluminum and stainless steel.
Details
500 ml
Art. No: W170126
Ideal cleaner for the food industry where there is no direct contact with food. Very high efficiency in grease and oil cleaning. Cleans and degreases without leaving residue.
Details
30 l
Art. No: W140604
Phosphate Finish is a product that provides cleaning of oils on metals such as iron-steel, brass and aluminium by wiping and also prepares iron phosphate ground suitable for wet and powder painting on iron-steel materials. The corrosion resistance of the iron phosphate layer formed on iron-steel materials is better than many chemicals and the dusting rate on the surface is very low.
Details
400 ml
Art. No: W170108
IMPA. CODE: 450619
It is a mineral oil based organic solvent developed for cleaning electronic cards and sockets. Cleans contacts, fuses, cable connections from oxidation and dirt. Repels water and moisture. Forms a wet film on the surface after application.
Details
2 kg
Art. No: W140618-2
Gel form cleaner used for cleaning surfaces after stainless welding. It does not allow any yellowing and rust formation. Especially ideal in the production of industrial kitchens and equipment. It is applied to the surfaces with a brush.
Details
200 ml
Art. No: W170109-200
IMPA. CODE: 450808
Effectively removes dirt that may cause arcing in the contacts of electrical parts. Provides safe use for cleaning and maintenance of electronic devices. Forms a dry film that repels moisture and water after application.
Details
30 l
Art. No: W140612-30
Solvent-based cleaner that removes quickly from the surface. It produces a quick solution in businesses that need effective cleaning in a short time. It can also be applied with a brush or cloth on very dirty surfaces. Since it does not pose a risk of burning, it is especially used for fast cleaning of large surface parts.
Details
30 l
Art. No: W140605
It has been developed to remove lime deposits on copper, aluminium etc. pipes in cooling towers. It is very effective in removing residues in heating and cooling systems (e.g. heat exchanger). It can be diluted to different concentrations according to the degree of pollution.
Details
500 ml
Art. No: W170131
Mould Cleaning Spray has a powerful formula. It dissolves and destroys residues and deposits with its effective formula that cleans and dries in a short time.
Details
1 l
Art. No: W170120-1
IMPA. CODE: 551511
It is a water-based cleaner used to remove residues such as dirt, oil and ink from all kinds of surfaces. It can be biologically separated into its components in nature. The concentrated product can be diluted with water according to the type of surface and dirt to be cleaned and specialised for the purpose of use.
Details
500 ml
Art. No: W170106
It can be used for cleaning and degreasing before priming and painting, for cleaning machine parts or before the application of other products to surfaces, where the effect of the oily substrate would adversely affect the condition.
Details
1 l
Art. No: W800655
In injection moulds, it cleans the mould when changing plastic raw materials of different types and colours, and eliminates colour-related problems in the next printing.
Details
30 l
Art. No: W170120-30
It is a water-based cleaner used to remove residues such as dirt, oil and ink from all kinds of surfaces. It can be biologically separated into its components in nature. The concentrated product can be diluted with water according to the type of surface and dirt to be cleaned and specialised for the purpose of use.
Details
500 ml
Art. No: W170130
Formulated for powerful cleaning and fireproofing. It dissolves and removes residues and deposits with its effective formula that cleans and dries in a short time.
Details
