Art. No: W160268
Details
400 ml - transparent
Art. No: W150149
It is an insulating varnish that forms a water-resistant protection layer and is resistant to bad weather conditions and corrosion. It meets DIN 53482 standard with its high insulation value. Especially suitable for hard-to-reach places. It can be used in repair and maintenance workshops of electronic products, furniture repairs and hobby purposes (works of art, model making, sports, hand tools, etc.).
Details
1 L - white
Art. No: W160173-1
Fast drying special coating that is applied to rusted metal to stop rust, protect the surface and act as a primer for the finish coat.
Details
6 markers - red
Art. No: W180006
Details
250 ml - white
Art. No: W160173
Fast drying special coating that is applied to rusted metal to stop rust, protect the surface and act as a primer for the finish coat.
Details
400 ml
Art. No: W160170
IMPA. CODE: 450823
It is a mineral oil based rust remover with superior rust penetration and high rust dissolving ability. MoS2 reduces friction very well due to solid lubricants. Resin, silicone and acid free.
Details
20 l
Art. No: W150208-20
White emulsion liquid that does not foam in soft and hard water. Resistant to bacterial growth and odour formation.
Details
500 ml - white
Art. No: W150306
It is a protective rubber spray that can be used to fill leaks and cracks.
Details
500 ml - gray
Art. No: W150305
It is a protective rubber spray that can be used to fill leaks and cracks.
Details
250 ml
Art. No: W150164
Details
3x500 ml - undefined
Art. No: W150141
IMPA. CODE: 450844
Enables non-destructive crack control on surfaces.
Details
500 ml - black
Art. No: W150304
It is a protective rubber spray that can be used to fill leaks and cracks.
Details
400 ml
Art. No: W140447
It is resistant to weather conditions and 280°C heat. Provides very good adhesion on metal, wood, glass, stone etc.
Details
400 ml
Art. No: W140442
IMPA. CODE: 450565
Weather resistant, copper coloured protective spray. Exposed to heavy workload for coating and protection of the remaining parts are used.
Details
400 ml
Art. No: W140443
IMPA. CODE: 450812
Long-lasting against corrosion on metals with zinc compounds that provide protection dry film product.
Details
500 ml
Art. No: W170121
Thanks to its special content, it cools the applied surfaces up to -50°C in a short time. In cases where urgent intervention to hot parts is required, it shortens the repair time and saves time by rapidly cooling the part. Can be used in industrial areas and electronics.
Details
500 ml
Art. No: W140620-500
Single component. It can be applied as a topcoat protection on aluminium surfaces or over the old galvanised layer. Provides cathodic protection. Conforms to ISO 3549 and ASTM A780. Before application, it should be mixed thoroughly with a suitable mixer until it becomes homogenous in the box. Provides 40 to 60 μ thickness in single coat application.
Details
500 ml
Art. No: W150152
IMPA. CODE: 450803
Provides protection and care on all stainless steel surfaces. It is effective in removing rust and water-induced stains and cleaning fingerprint stains.
Details
400 ml
Art. No: W150161
It is an ideal product to reveal whether there is any leakage in natural gas connections, armatures, joints.
Details
400 ml
Art. No: W150154
Formulated as mould release agent in plastic injection moulds. It ensures that metal and plastic are separated from each other without any problem.
Details
500 ml - white
Art. No: W150143
Enables non-destructive crack control on surfaces.
Details
1 kg
Art. No: W140620
IMPA. CODE: 252102
Single component. It can be applied as a topcoat protection on aluminium surfaces or over the old galvanised layer. Provides cathodic protection. Conforms to ISO 3549 and ASTM A780. Before application, it should be mixed thoroughly with a suitable mixer until it becomes homogenous in the box. Provides 40 to 60 μ thickness in single coat application.
Details
400 ml
Art. No: W150170
It is a metal-free, long-term coating resistant to corrosion, vapour and water. Forms a permanent dry film that is insoluble in water. It is used for maintenance, repair and lubrication in environments in contact with water.
Details
60 l
Art. No: W150203-60
The erosion lubricant ensures the most perfect machining of the part in wire erosion processes. It is especially suitable for sensitive and finely detailed parts. It provides the most suitable dielectric property in EDM (Electro Discharge Machining) processes. Low volatile. Creates little smoke. It can also be applied by dipping method.
Details
460 g
Art. No: W150214-460
Excellent cutting fluid for surface treatment, threading, tapping etc. applications on aluminium, stainless steel and all steel surfaces.
Details
