30 l
Art. No: W140599
Cleans hands from the most stubborn dirt, grease, oil, tar, pitch, coal grinding dust and residues. The product has a skin moisturising effect, so it is not harmful with frequent use.
Details
20 kg
Art. No: W140619
It is a liquid product developed for cleaning oxidation, welding and rust stains on stainless steel surfaces. It can also be used to remove surface contamination in industrial areas, kitchens, installations, equipment, etc. containing stainless steel surfaces.
Details
1 kg
Art. No: W150222
High Performance Grease is a combination of high temperature resistant lithium complex soap and highly refined mineral oils. Formulated with high viscosity base oils, it has a high load carrying capacity.
Details
250 ml - red
Art. No: 20310
Heat-resistant and high-strength conventional adhesive product developed for fixing and sealing metal screws.
Details
400 ml - black
Art. No: W9005G
Multi-purpose acrylic spray paint, developed for use indoors and outdoors and on various surfaces. It dries fast, has superior covering quality.
Details
500 ml
Art. No: W170121
Thanks to its special content, it cools the applied surfaces up to -50°C in a short time. In cases where urgent intervention to hot parts is required, it shortens the repair time and saves time by rapidly cooling the part. Can be used in industrial areas and electronics.
Details
200 ml - gray
Art. No: W200505-O
IMPA. CODE: 812842
High temperature and gap filling, oil tolerant, sealing silicone liquid gasket with high oil tolerance for flexible flange connections.
Details
100 ml - transparent
Art. No: W150210-100
Details
16 kg
Art. No: W150217-16
Significantly reduces friction with its rich MoS2 content. It is successfully used in equipment operating under heavy load and where friction wear causes problems. Ideal for moving parts in industry, automotive and textile industry.
Details
3 kg
Art. No: W140618-3
It is a gel product used to clean welding stains, oxide marks and rust stains especially on stainless steels with low sulphur content. It can be applied in industrial areas, kitchens, installations, machinery, etc. on surfaces with stainless surface contamination. Cleaning the surfaces before application increases the effectiveness of the product even more.
Details
500 ml
Art. No: W160117
IMPA. CODE: 450581
High quality mineral oil refined with versatile infiltrated moisture, oil and silicone-free additives and solvents combustible gas mixture.
Details
1 kg
Art. No: W150206
IMPA. CODE: 450526
General purpose bearing grease containing EP additives and lithium soap. Resistant to water washing. Provides long-term lubrication where applied. Minimises corrosion and wear. Ideal for lubrication of systems operating under extreme pressure, heavy and vibrating loads.
Details
1 L - white
Art. No: W160173-1
Fast drying special coating that is applied to rusted metal to stop rust, protect the surface and act as a primer for the finish coat.
Details
400 ml
Art. No: W150130
IMPA. CODE: 450825
It is a colourless, PTFE-containing dry film lubricant for metal, rubber, plastic and other materials. Ideal for applications where grease cannot be used due to pollution and aesthetics. Suitable for use in the electrical, plastics, textile and automotive industries
Details
70 ml - black
Art. No: W200502-O
IMPA. CODE: 812841
High temperature and gap filling, oil tolerant, sealing silicone liquid gasket with high oil tolerance for flexible flange connections.
Details
1 kg - off white
Art. No: W150200
IMPA. CODE: 450884
It is an excellent assembly paste enriched with ceramic particles. Water repellent, excellent adhesion to surfaces. It gives excellent results on joints, bearings, chain systems, pressurized devices, etc. exposed to high temperature and pressure.
Details
20 g - transparent
Art. No: 20100
It is a cyanoacrylate-based fast adhesive specially developed for applications where aesthetic bonding is important, model making and Styrofoam® bonding.
Details
1 kg
Art. No: W140620
IMPA. CODE: 252102
Single component. It can be applied as a topcoat protection on aluminium surfaces or over the old galvanised layer. Provides cathodic protection. Conforms to ISO 3549 and ASTM A780. Before application, it should be mixed thoroughly with a suitable mixer until it becomes homogenous in the box. Provides 40 to 60 μ thickness in single coat application.
Details
24 ml
Art. No: 20064
It is a metal-filled fast curing epoxy developed for emergencies, which makes its first grip in 5 minutes, reaches its functional strength within 1 hour.
Details
400 ml
Art. No: W160113
Plastic protection spray is a type of varnish that prevents corrosion. It forms a flexible and impermeable layer when applied. If necessary, it can be easily removed from the surface.
Details
1 kg
Art. No: W150223
It is a special high speed grease with synthetic base oil and barium complex soap. It exhibits a long-lasting performance especially in equipment parts operating under aqueous, variable, impact and vibrating loads.
Details
400 ml
Art. No: W140440
IMPA. CODE: 450814
Heat resistant for many metal surfaces provides corrosion protection. Service life is long. Dry film zinc and zinc The purity of the compounds is more than 90 per cent.
Details
400 ml
Art. No: W140441
IMPA. CODE: 450810
Aluminium coating with shiny chrome effect. Provides very good adhesion on metal, ceramic, wood and glass.
Details
500 ml
Art. No: W170131
Mould Cleaning Spray has a powerful formula. It dissolves and destroys residues and deposits with its effective formula that cleans and dries in a short time.
Details
290 ml - black
Art. No: W160270-S
IMPA. CODE: 815280
One-component, elastic, moisture-curing, ms polymer-based adhesive and sealant. It is applied for bonding various materials and sealing weld joints.
Details
